Izdelki za stroji za drobljenje (104)

SEKONDER DARBELİ KIRICI

Stock conveyors can be produced as radial type according to the location of the facility, land conditions and customer demand. The Belt Conveyor chassis is connected to the ground from the tail module with a fixed joint. High-strength steel construction feet made to support the weight of the intermediate modules and the drive module are attached to the axle located on the wheels. These wheels are preferred as filled wheels in order to be loose-proof. The gearbox is driven by a coupled motor. It is equipped with a special brake system to prevent movement due to environmental effects during operation or stopping. The center of rotation is the fixed hinge point in the tail module. It is provided to turn clockwise and counterclockwise by the angle allowed. In this way, the stock amount is much more than a fixed stock belt conveyor.

BUNKER

UĞURMAK brand Mechanical Stabilization Plant is used in the preparation of all kinds of mechanical materials used in road construction and airport runway construction. This mechanical material is obtained by mixing aggregate and sand of suitable size in the mechanical stabilization plant with a sufficient amount of water. Before applying asphalt, it is necessary to increase the bearing strength of the existing ground and eliminate the internal stresses, if any, against problems such as collapse orpitting. To achieve this, only mechanical material can be laid on the existing floor before asphalt application. This base layer, which will be laid before asphalt, must be suitable for compacting. Considering the 15-day sieve analysis results, the mixing ratios are determined according to the previous percentage rates. Foreign materials such as clay and silt should not be present in the mechanical material layer. Robust, clean aggregate should be used.

UĞURMAK UME series Inclined Screens provide separation of crushed material. It can be used in all the stages of a crushing and screening process, where it is necessary to classify the products by size. The main task is to receive the end product. Therefore, the screen determines the actual capacity of the process. UME series inclined screens have a more reliable body structure against the negative effects of vibration movement with its unique body design. When the material is poured into the screen, it moves forward on the screen mesh with a certain speed by vibration and is laid homogeneously on the screen. At this stage, the material smaller than the screen size passes to the lower floor.

Vibrating grizzlies and prescreening feeders are widely used in the mining construction and recycling industries to efficiently separate and feed materials. These feeders vibrating mechanism helps separate larger materials before they get to the main crusher or other processing equipment. Vibrating grizzly feeders also called grizzly screens typically have a sizable vibrating frame with a robust grate or screen at the top. This design allows smaller materials to flow through while the larger ones are sorted and moved to the crushing or processing unit. By screening the bulk material beforehand these feeders help to keep bigger rocks and debris out of the processing machinery enhancing the systems overall performance and efficiency.Prescreening feeders can boost operational productivity by ensuring a steady supply of material extending the life of primary crushers and other processing equipment and reducing wear and tear on them.

The Grizzly Screen is used in a wide variety of fields, including mining, building material, and aggregate processing. It is mainly used to remove large or rough materials in the feed stream before reaching the position of primary crusher or processing equipment. The screen is useful for handling heavy loads and large, coarse materials since it is robustly built and includes heavy bars or grates that are spaced in a manner allowing small particles to pass through, but not large rocks, debris, and extraneous material. Grizzly Screen to permit only desirable-sized material to pass to the next stage of processing. The advantage is that it will try to avoid blockages, reduce wear on machinery, and stabilize a flow of materials throughout the plant.

Our track cone crusher PTK156 is designed to deliver ultimate efficiency and performance in a large number of crushing applications. The hybrid drive system of the crusher integrates the reliability of Volvo, Cummins, and Perkins Tier 3-4 engines. This advanced hybrid technology further ensures lower fuel consumption and reduced emission, therefore an eco-friendly cost-effective solution. The crusher provides really ample screening area for materials to be processed, with a top deck measurement of 5,000 x 1,500 mm and a bottom deck of 5,000 x 1,400 mm. Coming with a weight of 34,500 kg, it is truly robust and durable to meet the harshest situations.The hybrid drive system of the PTK 156 track cone crusher is a powerful combination of forces by Volvo, Cummins, and Perkins Tier 3-4 engines. It perfectly balances diesel and electrical power with great high performance while keeping fuel consumption and emissions at a minimum. The hybrid drive works regularly and reliably

Our advanced track mounted screen plant is designed to deliver exceptional performance in various screening applications. Featuring three triple screen decks with a screen size of 5,200 x 1,870 mm, it ensures optimal material separation and high productivity. The plant weighs 36,500 kg, reflecting its robust construction. Driven by a hybrid system with motors from Perkins, Cummins, or Volvo, it offers the flexibility of operating on electricity or diesel. The screen angle is adjustable between 12-18 degrees, allowing for versatile screening tasks tailored to different materials and project requirements.The triple screen decks of our track mounted screen plant provide superior screening capabilities, handling large volumes of material with ease. Each deck is meticulously designed to ensure efficient and accurate separation, enhancing overall productivity.The expansive screen size of 5,200 x 1,870 mm allows for substantial screening area, making it ideal for a wide range of applications,

This Track Mounted Screen Plant offers unrivaled classifying and materials processing in the fields of waste management, mining, metallurgy, construction, civil engineering, and building materials in large-scale crushing and screening operation. In contrast to stationary screening systems, it is mounted on tracks and thus can easily be moved around a job site. The mobility of this machinery is particularly ideal for projects that involve frequent relocation or are stationed in rugged, uneven terrains where the movement of stationary equipment is time-consuming and difficult. Track Mounted Screen Plant finds most of its usage in sizing and separation, which is quite vital in mining, construction, and even recycling industries where material grading should be very keen on accuracy. Polygonmach designs highly efficient and long-lasting track-mounted screen plants.

ELEK

UGURMAK UMG Series Vibratory Grizzly Feeders are the main feeder type used in crushing and screening plants. They take place for feeding jaw or impact crushers used in primary stage. Offering high performance even in the harshest conditions, UMG Series feeders can be used for any size of material, from oversized material to small size stream materials. Thanks to the adjustable grill distance, the product size that cannot be included in the primary stage can be changed. It has a very solid chassis. Feeder body is seated on it with helical springs in sufficient number and strength. On this feeder body, there is a large volume bunker in the structure offering high strength. It can be used in all mobile and stationary primary units.

www.senolmakina.com.tr info@senolmakina.com.tr

www.senolmakina.com.tr info@senolmakina.com.tr